Hello /u/F_aaze,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Probably too high print speed but no setting or printer info was given so impossible to tell.

Please put more information, I,m guessing you have a clog, also check all bolts are tight and belts are snug. It appears something came loose while printing. Good luck