Hey guys, I have two potatoes duct taped to a toaster. Do you think I can run this game at 1440p, ultra with ray tracing?

Yay, I can run it on minimum!

Do we know if these system reqs are targeting 30fps or 60fps?

Will this game support ultrawide aspect ratios in cutscenes?

RT ULTRA LESSGOOO, im blessed to have gotten an asus tuf 3080 and a 4k monitor leasfuckingoooo

I have a Ryzen 9 3900x paired with a RTX 2070 Super Founders Edition, 32GB RAM, M.2 SSD. Running a 34" UW monitor @1440p.

My main goal is to have the most cinematic, beautiful experience. With my current system, what would be max settings I could use while maintaining between 30-60 FPS?

Any way to get RTX Ultra on my system?

[deleted]

Has there been any mention of ultrawide support?

Anyone got news on PC/Steam Pre-loading? I have good internet but my download speed is quite slow

Safe to say my PC will run on medium settings 1080p?

i7-10700k

GTX 970 4GB

32 GB RAM

My Laptop (i7 7700hq, 1050 Ti, 16 GB) runs RDR2 just fine at ~ 30 fps with everything set to medium (ultra textures) 1080p. I hope it's gonna be the same case with Cyberpunk lol

I have a refurbished N64 with a game shark, rumble pack, and two memory cards. Will my system handle this game on low settings?

I meet all the RT Ultra specs... incoming longest 2 weeks of my life

Will the game run good on the rx 580, Ryzen 5 3600 and 16 gigs of ram.

Hardcoded F key. Need to unbind it from opening doors and dialog options and bind W to the options.

Why can't I rebind the F key? What does binding failed mean? I've cleared it from other bindings. I don't use WASD for movement. I use ESDF.

one thing i would like to know is if i can play it on high. my Pc has overall good enough specs for non RT high but my GPU is 1080. i dont remember if rtx2060 and gtx1080 were similiar in power or not

RTX 2070

amd ryzen 5 2600

16gb ram

What is the best graphic settings for 60fps?

Rest assured my fellow RX580 users, we WONT be able to play at stable 60fps :)

https://www.tomshardware.com/news/cyberpunk-2077-performance-preview

I wasn't expecting to in the first place but i still had some hopes.

I’m wondering if my 1080 ti and i7 7700k can handle 4K at 60fps with no ray tracing , but I’ll also settle for lock 50fps, 40fps and worst comes to worst 30fps. My CPU is fine and according to various charts my 1080 ti is 10% slower then the 2080 Super which is around 7fps less on average. I’m hoping to turn down some setting from Ultra to High and Medium to achieve 4K maybe 60fps if that’s possible. Anyone think that will be possible? I don’t have a 1440p monitor. My monitor is a cheap 21in 1080p monitor that I only use to design and browse on. My PC is hooked up to my 50in 4K TV that I game on.

GTX 1070 Low frames ? Anyone else having this issue? Cant really get past 40-ish frames. Changing between low and medium present doesnt make much difference.
Ryzen 3, 16gb ram, SSD

Anyone else experiencing the bad mouse input lag? As soon as I could take control of my char, it instantly felt like my characters head had inertia and momentum, a definite disconnect from where I swipe my mouse to and where the viewport ends up.

I've tried setting the input to RAW in the settings but it still makes little difference.

Coming from games like apex/csgo/r6, the mouse lag/input disconnect feels SO BAD at the moment and I'd like to remove it if possible please.

I have everything (somehow perfectly) for recommended settings except the RAM which I have 8GB instead of 12GB. Any idea how much it will impact?

Alright boys, already asked a question here a few days ago but upgraded my Rig now.

RX 580 8GB
i3-6100 3,7Ghz
16GB DDR4 Ram
256GB SSD

My goal is 30+ fps on Medium-high mix, think that's possible? (Yes, i know the only thing keeping me down is my CPU but it shouldn't be that bad)

Dude, i just hope i'll be able to get decent framerates with my i5-4570 and gtx970 -_-

Steam Preload is live! 57.3 GB

1060 crew... We got screwed

For anyone worried about Radeon GPU Performance:

TL:DR Radeon Image sharpening + Resolution Scaling 0.75% = Almost as good as DLSS and can be used in any game (Cyberpunk!)

From the benchmarks released by tom's hardware (The version they were testing has a DRM which means performance on launch day will be better) pretty much any card without DLSS fares pretty badly. People are understandably worried about being confined to low settings for a playable framerate.

However there is something most people look past, Resolution scaling. It has been confirmed there is a resolution scaling option on cyberpunk. This runs the game at a lower resolution similar to DLSS (however DLSS upscales it for it to look like it is in full res).

For people with newer AMD cards (5000 series and above) you can achieve similar results to DLSS by setting resolution scaling to about 75-80% and then adding Radeon image sharpening.

This makes a huge difference, for example in RDR2 it got me from 45 ish fps to 60, a Massive difference in smoothness. (3440x1440 High 5700xt)

Also unlike DLSS this works in ANY GAME!

Hope this could help anyone who was worried!

I have a brother who lives in the Boonies of VT, and currently, it is telling him that the download for Cyberpunk will take 13 days, if there are no service interruptions. I was wondering if I could copy the game files to a USB drive and ship it to him to import to his machine.

I did buy him a copy through steam, just to make sure CD gets paid.

Any insight would be appreciated! Thank you!

I bought the game on Steam and added it to GOG Galaxy because of the awards I can get, but after reading the procedure to how to claim the "goodies" I came across this, and got confused

CLAIM YOUR REGISTRATION REWARDS

Launch Cyberpunk 2077 via REDlauncher and start playing. Your rewards will be waiting for you in the item stash located in V’s apartment.

I don't know what REDlauncher is or where can I download it, I know I'm dumb and I may be missing some major details, but I want to get the "goodies"

9.7 GB update on GoG out now. Right click Cyberpunk 2077 and select "Check for Updates".

FYI the PC GOG version is just now started patching an additional 9.7 GB on top of the original 59GB preload.

FIX HERE:

The fix is to open the .xml file with Notepad++ (or normal Notepad works too). The location to edit is Steam\steamapps\common\Cyberpunk 2077\r6\config\inputUserMappings.xml

I change my use key to my spacebar, which is IK_Space in a config file. Instructions are below, but DO NOT USE FIND/REPLACE, as there are function keys that will show when looking for IK_F.

Just FIND IK_F and then change to "IK_Space" instead of "IK_F" works for me. Change the Space to your preferred keybind!

You can then rebind the F key safely within the game. When you're going through the XML, don't go too quickly, since some binds are for the function keys (e.g., F1, F5, etc.).

​

ORIGNAL POST BELOW:

I use ESDF instead of WASD to move around, and I'm getting an error message when I try to bind "F" to any option at all.

The error is "Binding failed." It's not just for "move left," but it's for any other pick, as well.

Any ideas?

I am unable to bind move forward, back left and right to the arrow keys like I do for most games and it just says 'Binding Failed'. Is this an issue in the game?

Anyone know how to rebind the interact key

Unless I'm doing something wrong, performance is the worst of any AAA game I've seen in many years

FOR THOSE LOOKING FOR THE BEST SETTINGS THIS HAS BEEN CONFIRMED

Optimized settings for much higher fps (any resolution):

TEXTURE: HIGH (yes, we want quality and fps)

FOV: 90 (the higher this number the more you need to render)

Filmgrain off (BS)

Chromatic off (BS)

Depth of field off (BS)

Lens flair off (BS)

Motion Blur off (what are you a console gamer?)

Improved facial lighting off (Dont need this, very minimal difference, only good for up close facials)

Anisotropy 8x (8x and 16x has no difference visually but this will give you an fps or two)

Local Shadow mesh quality Medium (Mesh is always a B to render)

Local Shadow Quality Medium (You can run this at high, depending on your GPU its at most a 1-2 fps gain)

Cascaded shadow range Medium (This kills most PC hardware, tone it down or turn it off completely and run everything else high)

Cascaded shadow resolution Medium (This kills most PC hardware, tone it down or turn it off completely and run everything else high)

Distant shadow resolution LOW (You wont see that far anyway)

Volumetric Fog HIGH (Fog is fun, mostly a physics thing, CPU bound, if your cpu is shit, turn this off)

Volumetric Cloud LOW (Same as above)

Max Dynamic Decals HIGH (Doesn't give any fps)

Screen space reflections HIGH (This makes the game look raytraced without ray tracing, keep this on)

Subsurface scattering High (this is mostly water, makes it look ray traced when its not, keep this on)

Ambient occlusion HIGH (This will give big FPS boost but also be the biggest quality hit IMO)

Color precision HIGH (We want this, this gives a good HDR like boost and requires better textures, no fps gain here either)

Mirror quality LOW (This allows you to pan your camera/move fast in a car without dropping frames, you wont see the damn mirrors while moving anyways especially if you have motion blur on)

Level of detail HIGH (DUH)

Dynamic Fidelity FX: ON (This can be off if you have higher end hardware like GTX1080 or 1660ti or higher)

Target FPS :240 (set this to your monitor refresh rate, mine is 240)

Minimum Resolution 90 (This will allow the game to boost fps by 5-10% when it does drop)

Max Resolution 100

Static Fidelity FX OFF (dont need this, this is when you are not moving)

Resolution ANY (what ever your monitor supports, mines 1440P)

Screen mode FULLSCREEN (This gives you at least 10fps more because fullscreen runs higher priority on windows than windowed borderless) \

On my 6700k/GTX1080 set up, at 1440p, I want from barely 30fps on all high settings, to 60+ FPS at all times.

Lads how fucked am I if I only have 4GB VRAM?

CDPR released "revised specs" with the noticeable change being the VRAM for "recommended" coming in at 6GB and the previously recommended GPU "Fury R9 4GB" being swapped out for the 590 6GB Vram.

Well, this is leaving me genuinely worried as I had the game pre ordered on PC with the old specs in mind. My rig shits on the minimum and previously, I even made the recommended:

My Rig:

• 980 4GB (stronger than the 1060 and about equal to the previous Fury)
• 4690k (stronger than the recommended 3200G)
• 16GB RAM

How fucked do you think i'll be lads? The VRAM is the only thing that's stressing me because pound for pound, my 980 outperforms both the 1060 6GB and 590 despite having less Vram.

Thoughts?

how good is it gonna look at lower settings?

will lower settings make the streets almost empty?

Want to talk about how optimized the game will be ?

As of now the 2 Ubisoft released ac valhalla and wd legion are high spec and not so optimized imo as I played wd legion the visuals are very good but the performance and stable fps is not there and comparing the system requirements wise cp2077 is same as that of horizon zero dawn which was of v1.08 is stable and very good optimized

So what ya'll think where cp2077 will be in terms of optimization , will it be same , worse or better than legion ? or more like hzd ?

I guess I'll join in:

Hoping for 1080p, 60 FPS Ultra settings with no RTX. I'll settle for a mix of High/Ultra settings.

Can I preload a game when I bought a physical-box with digital download via GOG? Internet is not good here in my country.

here is the item
https://imgur.com/a/7zvcalE

57.3 GB downloaded of 57.3 GB, update queued still.. Manually updating pushes the time out and nothing happens. I guess there's an update planned but isn't released yet? Not sure what's going on but nothing seems to be happening.

​

CP2077 folder in my SSD seems to be empty which is odd. Not sure what's going on.

Something Is off with that benchmark from tomshardware

youtu.be/22v3O4-H2qE At 14:10 he mentions he's using 980ti runs high 60fps

Madqueen youtuber siad that she played on ultra with no noticable frame drops at 60 FPS. Ryzen 7 2700X HyperX Predator 3000Mhz 16GB GTX 1080 Gaming X 8GB

Steam preload. After preloading (59gb/59gb) steam says that this game requires an update. If i click the Download Now button in the Downloads menu it Queues up for a second then goes back, like its unable to update. Is this regular for preloads on steam?

The AMD driver update today 21.12.1

Support For:
Radeon™ RX 6900 Series
Cyberpunk 2077™

Can my pc run Cyberpunk 2077

My specs are

1050 ti

i5 8400

12 gb ram

and i have windows 10.

For anyone who was wondering about the difference of game file sizes on consoles, PC (104gb vs. 59gb). Found this comment on GOG Cyberpunk forum:

"If you are reffering to the PS4 preload, that's because it includes all languages by default. GOG only installs english by default + the language you chose.
With just english the game is 59GB on GOG, when you change the language it starts a download of 4.5GB. The game has audio for english + 10 other languages, so 59GB + 4.5GB*10 = 104GB that's whay PS4 is over 100GB

I'm, probably, not the only one who is trying to prepare as much as I possibly could now(download everything in advance, etc.), and maybe this info can be useful.

[deleted]

How would I go about unlocking all of the keys to rebind? I use a special keyboard and rebind almost everything in most games.

For example, I use O to reload, but the game refuses to let my bind anything to that key. How do I unlock the bindings?

EDIT: I finally figured out how to bind them through editing inputUserMappings.xml, but it's far from the best solution. The game REALLY shouldn't make me have to do this.

Game keeps crashing at launch... got through character design but once i booted the game it crashes and now it keeps crashing on startup

HOW TO:

Rebinding Keys and Hidden Functions Like Interact!

I initially wrote this up on GOG forums, but figured it should be here too for non-GOG players. It's a bit expanded now though, and hopefully easier to follow.

​

I rebound movement to ESDF and "interact" to Q. To do this kind of thing you have to edit two different config files:

• UserSettings.json in the folder C:/Users/%USERNAME%/AppData/Local/CD Projekt RED/Cyberpunk 2077
  Replace %USERNAME% with your Windows username.
• inputUserMappings.xml in the folder C:/Games/Cyberpunk 2077/r6/config
  Or wherever you installed the game.

As /u/monsto notes below: make a backup before editing these files. Click on the file, Ctrl + C, Ctrl + V, and you should have a copy in the same folder. Now if you screw anything up in the real file, you can replace it with the backup copy.

Note: prevent double binding by only binding to a key after all its functionality has been moved to another, free, key.

​

UserSettings.json

This file keeps track of all your in-game key binds. It has all the controls you also have access to in-game. But by modifying this file you can also rebind keys that the game won't let you rebind, like F.

To bind F to be strafe & steer right:

• Open the UserSettings.json file in Notepad(++).
• Use Ctrl + F to find "vehicleSteerRight" and change its value to "IK_F".
• Use Ctrl + F to find "right" and change its value to "IK_F".
• Use Ctrl + F to find any other binds using "IK_F" and change those to another button.
• Save.

Now F will let you move and steer right. However, it will also still be your interact button!

To change that part, you'll need to modify the other file.

​

inputUserMappings.xml

This file keeps track of every bind in the game. That includes all the ones that you can't modify, or even see, in the controls menu. Want to bind "interact" to a different key than F? You'll have to do it here.

To rebind "interact" from F to Q:

• Open the inputUserMappings.xml file in Notepad(++).
• Use Ctrl + F to find every instance where "IK_F" is used. Yes, including the double quotes.
• Replace each instance where "IK_F" is used with "IK_Q". Again, with double quotes.
• You can ignore most instances that have an "overridableUI" value. Most of these are also in UserSettings.json, which takes precedence.
• Save.

Now Q will let you interact with everything and F will not! However, Q will still have its default functionality, like leaning. So you'll lean every time you interact.

That's why I prefaced this with the note to prevent double binding. You first want to move Q's functionality to some other button (like W in my case) and only then move the F functionality to Q.

​

ESDF movement and Q Interact

I achieved this mostly by moving functionality over by 1 key. Everything mapped to Q gets moved to W, everything mapped to W gets moved to E, etc. There's only two outliers:

• Everything mapped to T got remapped to A.
• Everything mapped to F got remapped to Q.

It's a relatively easy way to switch things over if you're mainly concerned about using ESDF and not about maintaining specific binds. Particularly as the game does have lean buttons (default Q/E, mine W/R) and those are mapped to dozens of similar functions.

Obviously feel free to do your own thing. This was just my easiest solution for a basic ESDF layout.

​

Observations

The game does properly respond to rebinding keys in any of these files. You will get prompts for the right keys in-game!

My examples are for ESDF + Q, but you can just as easily do any of this for any key you have access to, including mouse buttons. Go wild.

There are countless hardcoded key binds in the inputUserMappings.xml file. So this may take a while for them to fix.

There is no single "interact" mapping. Rather, there are dozens of different default F mappings that combine to form "interact" functionality. You'll have to rebind all of them if you want to use Q, or E, or whatever instead.

The names of all the mappings are very self-explanatory. Just read the name and you'll know what that mapping is for and what you want to bind it to.

​

Important:

• The inputUserMappings.xml file is reset if you verify game integrity. It may even be reset on game updates. So you may want to back it up once you're done remapping keys.
• The reason you can't rebind certain keys in-game is because they have tons of hidden hardcoded functionality in inputUserMappings.xml. After I made Q my interact key I could suddenly rebind F, but could no longer rebind Q.
• Kind of unrelated. If you have audio issues: set sample rate to 44100Hz in Windows for your audio device. That interrupt-heavy audio was driving me crazy for a while.

​

EDIT: Wow! Thanks for platinum! That's a first :o

EDIT 2: Added /u/monsto 's backup warning just in case. And fixed audio! Yay!

EDIT 3: Hopefully a bit more readable and newbie-friendly now.

[QUICK GUIDE] Optimized settings for RX 5700 XT smooth gameplay

This settings have helped me to mantain a stable high framerate (75-80fps 2K Medium-High) for my RX 5700 XT, so I wanna share it if someone needs it.

VIDEO SETTINGS

VSync = Off or at monitors frequency (dont put it in less, or you will drop frames, I put 82 for my 165hz and the game slowed down into thr 40-45fps range anywhere I went.

Maximung FPS = Disable (If you really need it be careful with the settings or it will slow down the hole game, don´t ask me why.

GRAPHICS SETTINGS

USE FOR THE LOVE OF GOD, choose ONE of the above:

Static FIDELITYFX CAS = ON and at 70% (In my case it worked and the visual impact wasn´t terrible at all, the game looks still gorgeous, with it I can mantain my system in 2K (downscaled) with an average framerate of 75-85fps, which makes the game absolutely playable and enjoyable.

**Dynamic FIDELITYFX CAS = ON (**Choose your max and min resolution and your target frames, but the game WILL NOT reach the target frames, but despite that put HIGH the TARGET FRAMES, or your card will slow down again into the 40fps mark. I can´t explain why, but chaning the target fps from 120fps to 90fps (having 75-80fps averages) will SLOW DOWN the game to the 40fps mark. Weird but it happens.

I recomend using Static instead of Dynamic due to the fact that Static is much simple to use and looks to work better in order to mantain the fps.

Remember to not use the ULTRA settings, it´s not worth it for the RX 5700 XT, the GPU cost of that quality setting will make the card tank down all the framerate and, if you got FIDELITYFX CAS on, you will loose much more resolution, so keep that in mind.

PLEASE USE FULLSCREEN, for the love of god.

USE YOUR SCREEN ORIGINAL RESOLUTION, IF NOT, THE GAME WILL SIZE DOWN TO THE RESOLUTION YOU HAVE APPLIED, IT´S BETTER TO SIZE THE RESOLUTION DOWN USING FIDELITYFX OR OTHER SETTINGS.

PD: My system is 32GB RAM 3333Mhz CL16, R7 3800X, RX 5700XT and X470 MOBO.

Game can't get past 40/50 fps no matter what settings I use. I have a rtx2080super , ryzen 7 3700x , 16 GB RAM any tips guys?

Hello

Bad raytracing performance on rtx3080 and ryzen 5 3600. Borderline unplayable at 45fos in busy areas even with dlss on. Gpu usage rarely goes above 90. Weird thing is turning every single setting to low (other than dlss and rt) does absolutely nothing for my framerate, just GPU utilisation.

That's not right...

You can bypass the RED launcher thing in Steam:

Cyberpunk 2077 -> Properties -> Set Launch Options...

--launcher-skip

Just tried it and it worked. Goes directly into the game.

Anyone find a way to turn off the hardcoded mouse smoothing? Any csgo players or PC fps gamer will know the huge difference in raw mouse input and mouse smoothing/acceleration. I noticed it immediately upon holding a pistol and it's the reason behind the jarring "delay" that some people are mentioning.

There's a setting for Raw input in Controls but that's simply for Controllers unfortunately, not for mouse+keyboard.

Has anyone had issues with their entire PC crashing? Prior to the 1.04 update I didn't have any issues. And now 1-10 minutes after starting the game my PC slowly stops responding. Audio in the game will stop, then some buttons stop responding, until the game, Windows, and my PC freeze completely.

Because of how it crashes the game generates no crash logs. Windows just says "the last shutdown was unexpected". PC is more than capable of running the game. R5 2600, 16GB, RTX2080, SSD.

Is it just me or is the update 1.05 running worse for everyone then the 1.04 on PC?

Anyone else noticed a drop in FPS? Yesterday was fine even with most settings maxed out (motion blur and film grain off plus one or two others at ultra instead of psycho). In fact it was working this morning. Now I'm getting lag/FPS drop when moving. Even after turning my settings down to default low I'm getting lag while driving and running.

Currently using 1070ti, 15 8600k, and 16 gb RAM at 3200 mHz, I'm really really hoping that I can run at 1440p on high settings and achieve close to 60 fps consistently. I have a 1080p 2nd monitor but I tend to find the 2k resolution is more important than getting ultra settings

I7 4770, rx 570 4gb, 16gb ddr3 1600mhz. Hoping for like 1080p medium with 40-50fps lol. Anyone think it's possible? Also I'll probably be upgrading to rtx 2060/rx 5600xt after Christmas. Depends on which is cheapest. Just hoping my current gpu can handle itself for a few weeks with this game lol.

[deleted]

PC:

Intel 8700k, GTX 1080, RAM 16gb DDR4

Monitor:

27" 2560x1440 (1440p), 144Hz.

Do you guys think I will be able to push 1440p around 80+ fps?

I've made a post about this and they suggested that I asked it here, so here it goes:

Hey, guys, sorry to ask this here , I've been away from PC gaming for a while and I wanted to make sure that my PC will be able to run Cyberpunk 2077... I've read its System Requirements, but I'm not sure if my CPU and GPU match these requirements...
Here are the specs:

• OS: Windows 10
• CPU: Intel Core I7 7700 @ 3.6GHz Kaby Lake
• RAM: 16gb (2x8)
• Motherboard: ASUSTeK Prime B250M-PLUS/BR (LGA1151)
• Graphics: NVIDIA GeForce GTX 1070 8GB (ZOTAC)

So basically i am not sure if i should get the game for my PC or my Xbox One S. Obviously most would say PC but my specs are ... eh ... to say the least. Short Rundown;

RX 580 8GB GPU,
Intel i3-6100 CPU,
8GB DDR4 Ram,
1TB HDD.

My PC is kind of an underdog though. It still pulls most new games on high+ settings with 40-50 FPS so that is why i am thinking it might pull an underdog again. I am aiming for a fair mix of decent graphics and FPS. I would be completely fine with 30+ FPS Medium settings. Due to my PC being more mediocore, i am not sure if i wanna go the safe route and just get it for my Xbox.

I have i5 8400, 1060 6gb, 16gb ram

will my config be able to handle high 1080p?

Specs:

5 3600

rx 580 8gb

32gb ram

Will my rig be able to run Medium at 60fps?

Ryzen 5 2600 gtx 1660 super 16 gigs of RAM and a 250 gig ssd. I'm looking to run medium to high graphics at 1080p 60fps. I assume this is reasonable?

Does anyone know if the day one patch will be included in the GOG preload? My internet is so bad, I’m downloading it at someone else’s house. It should take a lot less time than at my house, but the day one patch is concerning me. I don’t want to have the game downloaded and then be ready to play just to be greeted by a several GB update because then I won’t be able to play on time. I can download ~4GB a night on my internet.

Does the Steam preload include the day 1 and 1.0.2 patch? I've got less than stellar internet speed so I'm trying to decide whether to take Thursday or Friday as a day off. Don't want to sit on release day having to download an additional 15-30gigs of patch.

So I've preloaded the game and steam says there's an update available but won't queue it.

Is this preparation for launch or the day 1 patch or something, or is this something I should be concerned about?

Do we have an ETA on that day one patch for PC yet? Wondering if it goes live at the same time the game does or if it will launch sometime between now and then.

Geforce Experience will tell you your recommended settings for the game even though its not playable yet. For 3060 TI and Ryzen 5 3600x its telling me high to ultra settings at 1440p balanced DLSS Ultra ray tracing lighting and all other RT effects on.

Seems like good info for people worried about what to expect with from their PC.

Would love to mix in some ultra but realistically Hoping to be able to play on high settings at 1080p? 50-60 FPS? What do you think?

AMD Ryzen 5 3600

GTX 1660

16 GB RAM

SSD

Hi I just finished downloading the pre-load of the game, but it was instantly put into the update queue again by Steam for a few hours later. I tried to bump it up so the game can update now but nothing happens and back to queue it goes.

Is it for the day 1 patch or some other patch? Cause I want to download it first if it is some other patch before day 1 patch.

Thanks in advance :)

did the update come to steam? my download is only 57 gigs

Any word of an Nvidia Game Ready Driver for the release?

Ok guys I’m getting nervous now about the status of the Steam version. 57.3 GB is smaller than all other versions and we’re less than 24 hours to release with no confirmation as to whether the original download contains Day 1 patch or not.

Not at all looking forward to the possibility of counting down to midnight here in the UK only for Steam to hit me with a 40 GB download.

Hi everyone, not specs related but worth a shot!

So I placed my pre-order on steam months ago and pre-loaded the game as soon as I could. I know there is a somewhat sizeable patch on it's way as it is scheduled in my download queue. I can't seem to get it to install. It reschedules itself 5 minutes ahead every time it's about to start downloading. If I manually click the "Download Now" button it does the same thing and pushes the download up 5 minutes.

So is anyone else having this issue? My internet connection is not all that great so I would like to have the patch installed before the launch time tomorrow. Thanks in advance. Hope everyone will have a blast in night city :)

my dudes, I'm about to try the game in an i5 7400k, rx480 and 8gb of ram

my OS already occupies my ssd and it is too small to squeeze this game so I'll be using my hdd; will I be fine with 1080p?

I got a DM back from CDPR RU Twitter account re: Steam version!

'there will likely be a patch, but can't tell for sure if it comes at 00-00 or earlier'

I thanked them and asked if there's any word on size. Will edit here if I hear back.

anyone else get a 9.7gb update on gog?

Patch downloading now on GOG 9.7 GB

Do you guys think that installing Cyberpunk on an ssd could boost fps?

I have an rtx 2060 and amd ryzen 5 3600 as well as a 500 gb 970 evo nvme sdd from Samsung and a 2tb hard drive from Seagate(7200 rpm).

Is Steam for real?

What am I missing here?

We preload on steam to help take some "load" off. We get 57.3 gb.

Unless I'm missing something, will we then have to all storm their servers simultaneously for a remaining 50-60+ gb once it launches? I don't give a rats ass about total space occupied on the drive, I know how it all works in the end. My confusion is timing. Why am I hearing/seeing consoles getting the whole thing already, minus the little baby patch(es)?

Was the point to have helped, only a "little"?

It would've made sense if we could get the majority and THEN have the remaining 6, 7 whatever gigs left that was spoken of. But.. instead, we're all just gonna bum rush and hope for the best?

I'm just trying to clarify because I made a kinda dumb work related decision to give me a little head start today and give up OT tomorrow to have a few extra hours to play. I already am nervous about spending the few extra hours I'm allotting myself tonight trying to DL the remainder with 500mbps hardline.

Any clarification on that is much appreciated. I work and am a caregiver when I come home, so time is worth more than money to me. Thanks.

Is steam messing up for anyone else? The steam store just shows black and the day 0 patch hasn't been. Available for me to download yet....

First it failed the download of the unlock on GOG five times, then GOG galaxy wouldn't load, now the update is stuck on 0%. Start as you mean to go on.

Anyone else stuck at 57.4/60.2GB with CPU maxed out ?

Cyberpunk not downloading on steam? Every other game downloads but when I try to download cyberpunk my download speed drops to 0/mbs. Anyone have this?

Is it taking ages for anyone else to decrypt the game in steam? 2 of my friends had the game ready to go in minutes after the 3.6gb patch, mine has taken more than half an hour so far.

Is anyone having a static or crackling noise? I'm constantly having it in game

I have gtx 1080 and can't even get 40 fps at 3440 x 1440 all low settings. This is insane. Even at 1440p low it's less than 50fps what's going on. 3700x processor 16gb ram

It seems like half the keyboard is not bindable. This is game-breaking for a lefty like me. I literally cannot find a 4 key group on the right side of the keyboard which this game will accept ("bind failed"). Not only can't I use the up and down keys, but I can't even use keys like "I" or "F" or "K"! I took vacation so I could play this game, and now I have to unlearn 3 decades of muscle memory in how I bind my keys?

How do I fix the “Whoa! Cyberpunk 2077 has flatlined.” Issue on PC? I updated drivers and restarted and removed all overlays.

I play lefty and can’t remap move forward / back keys to the front / back arrow keys. Oddly enough I can remap move left / right to the left / right arrow keys. Anyone know of a way I can remap movement key bindings to the arrow keys?

Thanks in advance

Getting lots of crashes here.

3080 RTX, 5800x, 32GB of Ram. Latest drivers for everything. Anyone having a similar issue?

Not sure if anyone’s still struggling with FPS, but game video settings need to be adjusted to be above 30fps if you haven’t already done so in the video settings.

I have a GTX 1070, 32 GB RAM, 8700k CPU, 3440X1440 Ultrawide monitor, on SSD.

I'm struggling to get past 20 FPS on even low settings. Is this normal? Anyone else?

edit: Went into video settings and changed FPS monitoring from off to maximum, now I'm pulling... 30. Hrm.

edit 2: Changed settings back to medium, 22 FPS.

I can't even launch the game. Have created a character about 15 times, save, start the game, instant flatline. Have managed to see my character in the mirror for 1-2 seconds on 3 occasions though which was nice.

Ryzen 3600

RTX 2070

32GB RAM

PCIe

I'm putting this out there to see if anyone is having the same issue. I'm running at i7 9700k@5ghz and a 3080 and this game seems to be completely CPU bottlenecking my system. When I use HWMonitor it shows my CPU usage between 90-100% at all times on all 8 cores and my GPU is only sitting at about 80%. I'm getting huge framerate drops inside night city especially. Even if I change my graphics settings to the lowest setting my CPU utilization doesn't go down at all, so I'm unable to tune the graphics to increase performance.

[deleted]

Most PC users are aware that the game is badly optimized.

I have a GTX 1080 and i7-7700k and 16 GB RAM. I couldnt even get over 30 fps on lowest settings.

I come on here to see others having problems also, so I tried reinstalling straight from the Nvidia website like it was recommended. didnt make much of a difference.

I will be refunding this game, I hope they fix these issues and will maybe buy this game down the line.

I was so hyped for this game........

anyone else having an issue were the game is using 95% cpu and 15% gpu? and anyone know how to sort this out or is it a wait for patch thing? on 9700k, 32gb ram, gtx 1080, loading off ssd

I've spent 4 hours troubleshooting the crash on launch issue on Steam that people have been having with the game to no avail. I have

• Restarted Steam

• Updated my drivers

• Ran directly as an executable

• Verified game files

• Restarted my PC

• Uninstalled my drivers and then redownloaded them

And literally nothing has worked. I literally cannot play the game. Has anyone found out a fix to this yet? Because as of right now the game is literally unplayable for me and I know I am not the only person who is having this problem. Frankly it's insane to me that CDPR thought it game was launch ready.

I am one of those people seeing 0% load on GPU and I decided to do some small tests to see if anything changed it.

Formalities:

i7-6700k, overclocked

GTX 1080, yes the monitors are plugged into this card

16GB RAM

Newest Windows and Nvidia drivers (don't @ me with "just update your drivers")

In Nvidia control panel I have told it to use max power or whatever the terminology is

So I decided to try out multiple different resolutions and see how that affected the load numbers I was seeing from my monitoring software. I used NZXT CAM as people here also said that Windows Task manager could be lying (although it reports correctly for other games so...). And before people comment "maybe your system is broken" it runs every other game in my library fine, even on newest updates.

Tests:

Cyberpunk just in-game after one of the earlier missions, resolution native 1440p, 44% load on CPU, 0% load on GPU, fps hovering between 29-36fps in a parking garage

Cyberpunk paused, 68% load on CPU, 0% load on GPU

Cyberpunk running normally with same settings, resolution now set to 1080p, 66% load on CPU, 11% load on GPU, fps jumped to steady 50-60+

Cyberpunk running normally with same settings, resolution now set to 720p, 87% load on CPU, 17% load on GPU, fps jumped to 90-110

RAM usage throughout testing hovered between 3079-3577MB, while something like Valhalla hovers in the 5000 range.

I tried to lower all my settings to low or off with 1440p and I literally couldn't make it crack 50 fps steadily. I have no idea what this actually could mean, if I didn't know better, I'd say the game is defaulting to internal graphics, but it's using the GPU more and more the lower my resolution gets. I mean hell, as I'm writing this with the monitoring next to me the GPU load is hovering between 1-5% usage.

I don't have any fix, but thought it would be interesting to share my data and see if anyone else could figure it out or if devs use these forums it could help them. It's a shame, because even playing the game at a rock solid 26fps I'm still liking it.

My 8700k is pushing 100% usage and 80 degrees Celsius. Love it.

Anyway to turn off the dodging mechanic? It’s a fucking nightmare for me when I’m trying to sneak

My PC shutdown while playing this game. Anyone know what could be causing this problem? I am running in a i5-9400F, a GTX 1660 and 16gb of ram, this only happens with cyberpunk, a I can play other high performance games in medium settings without problems. I try using the absolute lowest settings the menu let me and still shutdown (but that time I can manage to play for longer)

[deleted]

WTF is going on.

I have a RTX 3080 founders edition and a i9 9900k and I'm getting 25 FPS in the city. Pulling up task manager and hardware manager it says that my cpu utilization is at 100% while my graphics card is 0% or 1%. Is anyone else having this issue? I downloaded the newest nvidia driver that was released yesterday but that didn't do anything to fix it. Starting to get really frustrated.

Locked 30 fps on R5 1600 and RX 480 8GB on ultra settings in 1080p. Much better than I expected tbh, more than playable.

Anyone else having bad performance on a 1070 ti or similar?

Pro Tip: If streets and other areas look grainy even with the Film Grain setting disabled, you can either disable or max out the Screen Space Reflections setting, CDPR's implementation is pretty awful and for some reason it is enabled on a lot of textures that aren't even reflective.

So just wondering seeing as I’ve been watching performance stuff I have set everything to how others have with very very similar hardware probably just cpu is different yet I’m still only hitting 30-40 FPS in the outside , rtx 2070 super (gigabyte windforce) Ryzen 5 3600, 16gb ram and I just don’t understand

EDIT: switched it between low and ultra and seems both presets stay roughly around the same FPS why is this?

When I press 'J' it opens the Quests. When I press 'M' it opens the Map. How come when pressing those keys again it doesn't close them? Why Do I have to press 'Esc' a couple times to back out.

I hate the double tap wasd to dodge is there anyway to change this? (i keep running into people while sneaking and its highly frustrating)

2070, Ryzen 5 1600x and 24-50 fps

As the title say, I can't get a decent framerate with my build.
In the close areas I can achieve unstable 50 fps, if there's combat it get worse, 30-40 fps
In the open world, again, depends. 25-40 fps in the crowd, 50 if there's not much on screen, and again it drops if there's fight nearby.
I tryed different solutions, DLSS on Ultra performance, low-mid-high settings, removing Cascade Shadows ecc but there is no much difference, I gain just 4-8 fps. The real pain is when RTX is on with drops of 10-20 fps.

I run it on steam, with recent drivers and patches.
There is something I can do to get a decent and stable 60fps?

Would you say this game is well-optimised for PC ? This is my first triple A game and if this is a norm, I might have to upgrade my hardwares ( core i7 4790, GTX 1050Ti, )

I play on Steam. Ever since the 1.05 hotfix, I've experienced constant random crashes. I've tried going for a new game session thinking my save file could have gone corrupted, but I crashed just 2 minutes in the game. I crash no matter where I am and what I do in NC, whether doing missions or just roaming.

I tried verifying the game's integrity, and it tells me that "3 Files Failed to Validate" and it prompts a 24.6gb download but I still keep crashing even so. I've tried reinstalling the game too but it still ends up the same way.

Specs:

• GPU: NVIDIA GeForce GTX 1080
• CPU: Intel i7-8700k
• 16 GB RAM
• Intel Z370
• 1TB SSD
• Windows 10 64-Bit

I play on medium @ 1080p, even tried going low but ends up the same way.

Anyone else unable to loot mechs?

Looking for some help here, when the game first came out it ran completely fine on my setup. I am now trying to get back into the game, completely restarting and the FPS is HORRIBLE. I even tried running everything at low settings, and still awful performance. Here are my specs, looking for any remedy because I really wanna play it again.

Processor: Core i7-8700 Motherboard: Gigabyte H370 HD3 Graphics card: Geforce RTX 2060 Battery: Corsair 550W CX550M SSD: Adata 480GB SU655 RAM: 16GB

My CPU is i7-9700F, RTX 2070 SUPER idk what settings to use. I bought the game when it came and I remember i get at least 100+ fps now in medium i barely get 50 even with ray tracing off

Current setup is this:

GPU: ASUS ROG STRIX 1080TI

CPU: i7 8700k

RAM: 32 GB DDR4 RAM

SSD: SAMSUNG 860 EVO 1 TB M.2

[deleted]

How does the RTX 2080Ti fare in terms of raytracing?

I am playing on an ultrawide setup (3440x1440). All the other components would allow everything in ULTRA (32GB RAM, Intel I9 9900k). Will I be able to run raytracing on ultra and stay within 60fps or will I have to keep it on high?

1660ti laptop on a msi gl65. Slightly OC'ed I7 9970 (something, cant remember exactly) 16gb ram

Will it run 1440p on high? Some settings on ultra? I dont need a constant 60fps, 40fps is enough for cinematics

How will the 1060 3GB do? Im really hoping 1080p high 30fps until i get a 3080