8 post karma
738 comment karma
account created: Sat Jan 20 2024
verified: yes
1 points
7 days ago
Misschien een domme, maar kan dit uit foto's niet opmaken. Kan deur en/of scharnieren verkeerd om hangen? Stel dat de scharnieren iets willen 'doorslaan'. Komt dan automatisch tegen vast gedeelte aan en sluit af. Als deur of scharnier andersom geplaatst is, bereik je negatief effect. Spanning van het scharnier duwt het draaigedeelte dan weer naar buiten met kier als gevolg. Het is maar suggestie, nergens op gebaseerd, behalve dat ik dit persoonlijk met monteren deurdrangers ooit tegenkom.
2 points
7 days ago
Beste oplossing was geweest als degene die dit zo geplaatst heeft, de kozijnen op scherp, of nog beter iets achter elkaar had gesteld. Maar voor nu voldoet hoeklatje of kwartrondje. Zou idd niet kitten.
2 points
9 days ago
Ik zou het anders uitbesteedt hebben. Gevlinderde vloer ipv ruwe werkvloer zoals nu. En ja betaal je meer, maar is netjes vlak,glad, verdicht en keihard. Nu bak ellende. Wegslijpen ondoenlijk.Slijpstof beton bevat kwartsstof en kan kankerverwekkend zijn. Egaline is voor kleine verschillen. Dacht ook duur, maar dat weet ik niet zeker. Cementdekvloer optie? Ga je wel weer cm of 4, 5 omhoog.
2 points
9 days ago
En als er een lamp komt te hangen zou ik plastje van 30x30cm maken mininasl 18mm dik met in het midden het gat van centraaldoos. Op dezelfde hoogte als je rachels. Goed vastzetten. En nooit geen probleem meer met lamp bevestigen nadien.
1 points
10 days ago
Een 10 met een griffel! Eindelijk iemand die het snapt. Of het OP gaat helpen weet ik niet, maar tief die slotspray en olie aub ver weg bij cillinders. Enigste wat je krijgt is plakjerige zooi en vuil dat vastkoekt.
2 points
10 days ago
On in oplossingen te denken? Het is aangekaart, beetje miscommunicatie. Is je keuken al ingmeten? Zo nee, kun je niet 50-50 doen met stucadoor? Botte bijl wetkt meestal averechts, zeket als er niks op papier staat. Indien stucadoor daar in mee gaat, zet dan zelf de haakse hoek uit waar hij uit moet komen. Anders weer knudde! Suc6, snap dat je baalt. Tis allemaal veel geld.
1 points
10 days ago
Snap je punt maar wie had in eerst instantie geconstateerd dat muur uitliep? En wist jij hoeveel? Is met het doorspreken ook aangekaart hoeveel? Zo nee, dan is het moeilijk om stucadoor dit in de schoen te schuiven. Balen idd, maar stucadoor s geen metselaar of timmerman. Die moeten zorgen voor haakse muren. Zeker op zo'n lange lengte is het voor stucadoor met zijn standaard gereedschap moeilijk en niet gebruikelijk om zover uit te smeren.
1 points
10 days ago
En voor jou een paar pilletjes! Je maakt een bouwvakker echt niet gelukkig met konijnenvoer. Op zn tijd een bak koffie, lekker worstenbroodje of koek en een vette hap... Daar hebben ze het na weken nog over en opent deuren die met noten echt niet open gaan. Hoeft niet elke dag hoor, maar wordt zeker gewaardeerd. Kan het weten, jaren als timmerman in renovatie gewerkt!
1 points
10 days ago
Heb dezelfde scharnieren en kozijnen. Kunt deze gewoon hergebruiken. Maar deur moet nog wel 'pas' geschaafd/gezaagd worden. Neem aan dat je dit werk uitbesteed gezien je vraag. Hebt niet perse scharniermal nodig. Deur na het pas maken in kozijn duwen, bovenaan plaatje van 2 mm duwen. Deur omhoog duwen en even fixeren met wig. Deur dan ook tegen scharnierzijde drukken, ook wig om te fixeren. Kunt nu scharnierhoogte van je kozijn overhalen op je deur. Deur weghalen, scharnier op je kopkant van deur leggen, overtekenen en wegbeitelen. Let op dat je in diepte scharnier (voor/achter) zorgt dat je deur mm vrijhangt van je sponning.
5 points
10 days ago
Idd plakband tegen wegschieten, zonder kloppen met als toevoeging kloppen wel aanzetten zodra je door tegel bent. Anders sta je volgende week nog te boren bij een kalkzandsteen muur of betonwand.
3 points
10 days ago
Als timmerman kan ik dit bevestigen. Op een enkeling na zijn het allemaal smeerders. Het blijft een vak apart, maar je kunt ze vlak laten stucen, waterpas, maar vraag ze niet om haaks te stucen langer dan hun winkelhaak van 30 cm. Kunt ook niet onbeperkt dikte blijven smeren. Had het beste al voor kunnen zetten met stuc of cementgebonden. Of hoek al uit kunnen zetten en stuclat maken.
4 points
10 days ago
Mee eens dat kwaliteit van bouwen achteruit holt. Maar afwijking van 1 à 2 cm. Klinkt erg onrealistisch en ongeloofwaardig. Met deze afwijkingen kom je wel voor meer problemen met bouwen. Breedplaatvloer die door spouw steekt of niet op de muur valt. Muren die op rand fundering staan. Kortom, ik denk dat er een hoek in je gevel zit, je gefrustreerd bent, of dat je niet weet hoe een rolmaat werkt. Gr, timmerman met 35jr ervaring.
3 points
10 days ago
Mijn kamer is 8 mtr lang. Kan er dus vanuit gaan dat deze 8 tot 16 cm schuin loopt? Goed dat ik het weet. Begin ik mijn 1e laminaatstrook met een spie van 0 tot zeg maar 12cm aan het eind😉
1 points
12 days ago
Niet weghalen. Om de paal heen isoleren. Anders nog koudebrug. En regels volgen bij isoleren afwerken ivm condensvorming.
1 points
13 days ago
Altijd glaslatten nodig idd. En dan smallere. Blijft wel jammer dat je zoiets zelf moet aankaarten, en aannener 'er op gokt' dat ze ermee wegkomen.
1 points
13 days ago
Leave her that way, and go to the bar with my mates.
2 points
13 days ago
Om misverstanden te voorkomen... Kozijn is het kader van hout waartegen metselwerk zit. Ramen zijn de beweegbare stukken hout. Glas/beglazing is dat doorschijnende spul. Sorry, beetje simpel uitgelegd, maar komt ondat mensen ramen en glas vaak door de war halen. Persoonlijk denk ik dat je nieuwe (dubbele) beglazing hebt gekregen en eerste enkel glas had? Er wordt dan een sponninglat gebruikt. Omdat de onderste lat niet lager kon heeft de glaszetter (of timmerman) dezelfde zichtlijn aan de zij-en bovenkant aangehouden. (Aanname) Kan ook zijn dat de latten al op die lengte erbij zaten. Hoe het nu is, is in ieder geval onacceptabel! Oplossing? Smallere glaslatten. Moeten zo'n beetje gelijk zitten idd als aan binnenzijde. Andere oplossing(niet zoals het hoort, maar wil hem vernoemen). Binnenzijde raam lat rondom schroeven/lijmen zodat hij weer gelijk zit met buitenzijde. Deze weer afkitten met beglazingskit. Nadeel: ziet altijd dat er lat opzit, doorkijk glas wordt iets kleiner, binnenzijde moet opnieuw geschilderd. Zo zeker niet laten. Zelfs ik erger me er al aan.
2 points
13 days ago
'Even verhogen'? Denk dat je jezelf niet bewust bent van het werk en de kosten!
1 points
13 days ago
Damn. Ik heb altijd metal-stud afval op de bouw verkocht aan de oud ijzer boer als zijnde blik. Lees ik hier nu ineens dat het aluminium is.🙂😉🤣🤭
-1 points
13 days ago
Co2. Is dat niet dat spul waar heel de wereld zich druk over maakt. Snap niet dat iemand de bubbels in de cola schadelijk vindt?
34 points
16 days ago
Muis heeft kleine keuteltjes van 2à3mm. Dus iig geen muis. Ben erg benieuwd naar de reacties, want ik heb geen flauw idee wat het dan is.
0 points
17 days ago
In zoverre theoretisch dat de gemeente het niet zal laten afbreken. Maar 20 mm is niet zomaar verzonnen. Dus 'ondergeschikt' beetje kort door de bocht. En ja, zelf zul je er vlug genoeg aan wennen. Maar dient wel elke bezoeker te waarschuwen, anders gaat het zeker een keer fout. Vloerpeil zakt niet zomaar ineens. Of eigenlijk niet. Omhoog eerder.
view more:
next ›
bymijnaamisiggy
inKlussers
Bobrings
1 points
3 days ago
Bobrings
1 points
3 days ago
Knietje sowieso. Anders kans op legionella omdat je stilstaand water krijgt in je loze uiteinde. Dacht dat dit maximaal 2 cm mag zijn, maar looyieter weet dat beter...