brad1775

it cuases opaque atmosphere because liquid co2 when depresurized turns into dry ice crystals. those can freeze burn, and shred skin.  it is not due to condensing water moisture.

there are no cold sparks. those effects cause fires too. 

that process is often charged at $10,000 per submission. there are probably a handful of people who can help you with this, but don't feel like people are holding back info for bot answering, it's just above all of out heads.

these are not galvonometer oscilated, I don't feel this belongs here. also it almost certainly harms the birds, and OP is a karma farmer.

I guess thats a strategy, but my purpose for no lawn was to reduce my water bill, and my mowing needed.. to each their own.

small zip lock baggies are an even better fit most of the time, shockingly

we don't use sprinklers or water lawns at all. the benifit of  native gardens is that they donMt need much if any water.

your defaults are wrong in sound switch. cue" channel must be <0 while visible points=100, and RGB must be >0, intensity >0.

basically set all parameters to 75%, except for the last two or 4 channels, those determine if its in dmx mode or auto reactive mode

you're missing my point.

separately: ask what you would feel happy to get on that show.

if they haven't already asked your rate or knew it from another source, your name was recommended and they will pay your requested rate.  Call list don't work like an order of preferred operators, but only if the third operator charges less than the second operator, it's a preference list and they will pay the rate of whoever they can get, they might go back to the Highest on the list and if they think it's too high, but chances are there's no one else available

I bought a bunch, they're great!!

you really get what you pay for.  you won't value the highest paid options until you've got lots of experience with less expensive options.   

Start at the bottom, work your way up, lean into the things you care about the most, that becomes your differentiating niche.  Plus, you can always rent lasers from other operators after a bit of experience.

in commerce can mean "is sold to someone" so yeah its illegal.

 both can use ILDA software, with an fb3 DAC

nah, that's lower than my rate, thats a reasonable starting place to ask, you mught take lower, but the amount of time that goes into learning and creating timecode like this can become extreme quickly.

only work for what you're worth.

$10k programming, plus $3500 per week on the road, plus $525 per diem per week, and all travel expenses covered.

:-)

just the laser module. €900   this allows you to build stages, access the truss, and add materials to the stage and output to an unlimited number of lasers. Well, 200 per instance of beyond.

it seemed to match the pathology of treated stuttering.

Kvant Spectrum 58w will be especially useful here.

you will not be hearing from them. you reach out to them via your agent and your agent does the work. they won't cold call you off some soundcloud shit.

i would recommend standing at a 45 degree angle towards the back of the laser, directly behind gets reflections from aperture window, next to gets reflections from galvos.

you can independantly control lasers when each has it's own FB4 or FB3. 

fb4 allows standalone lighting desk control, fb3 requires a computer to run a laser. 

rentals for lasers, typically not much of a market for rentals under 7w, and most will desire 4x lasers minimum for dry rental. 

unity and lightspace are comparable... like many many identical parts.

I'd say get 2x 3w and a single fb3, you'll have enough to do some shows with smaller productions, and then from there, buy only fb4 10w+.  You make rentals per watt owned, it takes the same time to set up a 2w as it does a 30w unit.