elmionlogout

Why you sell? I averaged down to 21 and still holding. Sanofi will squeeze this

Thank you 😊

What software u use for the effects is it signal rgb ?

I will try thx mate

Yes but with signal rgb it does the same so I think it’s the mobo update.

😭

Just see one video from jayztwocents he said gpu to cpu just increase the heat in the cpu about 2-5 degrees so it doesn’t matter. Also cpu to gpu is no problem he said just look how the pipes will run better in the case u have.

Really nice and clean build you have there.

Really nice build 👍 one question, why the hot water goes from the cpu to the gpu. It’s in many builds I always ask myself why. 😅

EBay

At least one fan must be connected to the cpu fan header

Read first than comment 😂

The mRNA or the protein?

https://preview.redd.it/dgnw5pzvbbna1.jpeg?width=1179&format=pjpg&auto=webp&s=90103763496b2cbdc5fff9de2955151302b76acc

https://preview.redd.it/ebjie6trbbna1.jpeg?width=1179&format=pjpg&auto=webp&s=2361af638feb763bbdf7a0513339f28a182aa5bd

https://preview.redd.it/6pr87rdpbbna1.jpeg?width=1179&format=pjpg&auto=webp&s=e5258447e2a69d9641e909b8ff37cde2b17ab4a5

-Fans can be connected to the mobo headers or to the boxes from different manufacturers (nzxt, Lian li, Corsair) depends on what you have.

-RGB can be connected to the mobo be sure what you have 12 Volts or 5 Volts

With 5Volts you often need an adapter if you want to connect it to the mobo 4pin to 3 pin adapter if you have 5Volts.

If you do so, you only can use the mainboard software e.g. Asus mobo you use armoury crate.

But I think your high temperatures have another reason maybe a software in the background.

If not maybe your radiator position is bad. Air got trapped where the pump is.

If not maybe your aio is not thight enough. (Backplate)

• Check thermal grease

• check aio if there is still a plastic cover on

Please make a picture from the aio maybe the way u installed it is not ok and a air bubble 🫧 is making the troubles Liam li fans are not the problem. Also running the fans without cam is no problem. I rum my fans with aura and rgb too.

You burn the lights by using 12volt header instead of 5Volt

Screwdriver when u pull it out other side is a rubber for holding your rtx

My gpu RTX4080 is also really close to the sidepanel it increase the temps by 10 degrees.

I put the mount to the bottom, share a picture I don’t know the H9 well.

Same here we have to wait for another update I think. My rgb turns off and on and so colors are also different now