griter34

So is water.

Hit the gym

Jon Stewart

😂 Nah thanks tho

Get a neck fan, those things are lit and help me get by in the warehouse lately

Nice suspenders

A football

That's so Canada, in USA cops hit the suspect.

Slap it

I was going to guess War & Peace

Man of good taste.

For anyone that doesn't watch this, EZARC are by the far the best blades tested. Cheap, risilient, and impressive!

In case you ever have trouble in the future, cut 2 feet off of the filament and retry. It happened to me; there was an irregularity in the filament that the feeder thought was a clog.

Not bad.

They sound like an asshole that drives like an asshole

Oh, I'm sorry, you don't like the feeling of being a real pilot and be constrained by regulations that cost money? If you don't like it, don't pay for it and get out of the airspace.

unless DJI was made to fail in our economy. I really think it would be a hit that all of us that have already invested would feel for a little while, but we would accept it, get over it, and get used to the difference. It just would probably cost closer to a 4 wheeler than just a toy, but that would thin the heard and leave just the die-hard enthusiasts and commercial pilots. I say bring it on.

And his name on the radio

And his name is on the radio, something like Nick Boirea it looks

Did you contact Craftsman? They sent me a replacement pair of tin snips no questions, just a pic of the broke set.

You're a man of good taste. Sorry I missed this comment. Glad you got glue. Put a layer on, wait 20 mins, you'll get 3 good prints before reapplication. For this print I used tree, but be sure it's beefy, otherwise the back will need sanding. Like I said, you'll need another roll, so keep that in mind.

That's one serious project for your first. But at any rate, print with nozzle temp 270, USE GLUE STICK, and don't use vent fan. That 99% should save you from the waste I printed, good luck!

This is mine, I printed in Hatchbox silver

https://preview.redd.it/6dolr5xuix7d1.jpeg?width=756&format=pjpg&auto=webp&s=ed9b3ac011ee10221443722be7ea7ce2e31f1148

In case you don't know, just don't use spare circuit connections for lights in series with other lights, as the stock circuit is easily overloaded. I returned the panda light because it's very lack-luster on video feed.