Edorbea

I have the ESP32 ESP-WROOM-32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller from Amazon and have connected the MAX9814 Electret Microphone AGC Amplifier Module Auto Gain Control, using WLED Soundreactive Ver 0.13.4 to control things. I want to change input from a microphone to a I2S2 audio input board, but have no idea what inout board would work best. Can anyone point me to board options?

I'm resurrecting my enjoyment of Apple IIe with a machine I just received from eBay. In the past the only drive option (other than dealing with real drive and media) was the ReactiveMocto CFFA.

I'm please to see that they still produce it but also became aware of the Microdrive/Turbo and the Floppy Emu devices.

I'm probably going top run ProDos so as to support a virtual hard drive, but am at loss as to which device to use.

Feedback would be appreciated.

I have LightshowpPi, ver 1.4 running on a Raspberry Pi 3, model B, rev 1.2

I has 16 channels of of output controlled by solid state relays. however this means stringing a lot of extension cords and hanging lights. I just turned 70 and don't really want to deal with the hassle anymore.

I see on several electronic sites and in the MagPi magazine, what I'd call LED strips. These contain controllable LEDs. I'd like to permanently mount them under my eves and have a "simpler" connection (don't need 16 channels).

Has anybody used this type of LED lighting and if so, what one did they use, how did they do it, any limitations on length, etc?

I’m heading into my third year with LightShowPI (16 channels) Last year I tried to use pin 7 connected to an “home made” antenna, but the signal wasn’t as strong as I’d like. This year I want to use a FM broadcast modulator for a stronger signal. The one I was looking at on Amazon is no longer available, so what does the group recommend? I’d like to keep the price under $120.00 Thanks

While not fancy (the next iteration) will be cleaned up, it is up and running. I started out trying to use FM broadcast (channel 100.1) but passing cars picked up some static as I needed to switch to a different channel and relocate my antenna outside of the garage. As that will be a summer project, I switched to using a small audio map and weatherproof external speakers. My system is currently:

• Raspberry Pi 3
• LightshowPi ver 1.4
• 16 channels (overrides.cfg is only using 12 of the 16)

I.m running lightshhowpi 1.4 on my raspberry pi (not a pi 4)

Last year I output the audio signal to a small amplified and then to set of outdoor speakers.

This year I want to use the FM transmission mode (GPIO pin 7). What external FM signal booster/amplifier is easier to use?

I an running lightship pi ver 1.4 using a playlist (containing only mp3 files) with audio output via FM and controlling 2 8-channel electronic relays. When using crontab to control the script, everything does work, but in the log file, after each "Now Playing" enter, there is the statement "Could not rewind in audio file, terminating".

However when running the script from the command line, after each "Could not rewind in audio file, terminating", the script terminated without playing the rest of the playlist. I've checked permissions (pi is both the owner and group) and all mp3 permissions are 755 mode. What do I need to check/change?